The Mendel 3D printer is the original second generation 3D printer from the www.reprap.org community.
You can find much information about this printer on this link.

For the Mendel 3D Printer you need the following parts:

• Casted Mendel parts with Wades extruder
• Mendel bars and studdings set
• Mendel nuts and bolts set
• Mendel bearings set
• Mendel timingbelts set
• Mendel printbed set
• 4 Nema17 steppermotors
• Wades extruder screw set
• RAMPS 1.4 electronics set
• RAMPS 1.4 wiring set
• ATX power supply
• A hotend: either a arcol.hu 4.0 or a J-head hotend

Also recommended: a [http://www.2printbeta.de/product_info.php?language=en&products_id=155| heated print bed kit]]

For building up the Mendel 3D printer, you can take a look at the following page