Differences

This shows you the differences between two versions of the page.

Link to this comparison view

bam_dice [2014/09/26 21:09]
konrad
bam_dice [2018/07/20 16:08]
Line 1: Line 1:
-====== BAM&​DICE ====== 
- 
-BAM&​DICE is a combination of the BAM-Shield, our enhanced clone of RAMPS V1.41,\\ 
-mounted with the common used PCI-E connectors for the suitable DICE modules. \\ 
- 
-{{:​logo-bam_dice.jpg?​300|}} \\ 
- 
-During the development following intended improvements have been forced: 
-  * High power driving capability 
-  * Thoroughgoing flexibility for prototyping projects 
-  * High number of in-/outputs 
-  * Usability 
-  * Cost effective design 
-  * Testability 
- 
-===== Brilliant performance ===== 
- 
-When using DICE-STKs as standard stepper drivers, the BAM-Shield offers \\ 
-about twice the motor power, compared to the common RAMPS stepper drivers.\\ 
-By replacing DICE-STK with other DICEs, even higher currents are possible. \\ 
- 
-If you get a simple idea for a extraordinary device, BAM&​DICE will give you \\  
-mostly everything to make it fast and simple. 
- 
-===== System ====== 
- 
-Heart of the system is the Arduino Mega1280/​2560. ​ 
- 
-The [[http://​wiki.2printbeta.de/​doku.php/​bam-shield|BAM-Shield]]offers the adaption of the DICE-Boards to the Arduino \\ 
-and some peripherals:​ 
-  * Fuses 
-  * Three high current switches 
-  * Three analog inputs 
-  * Six endstop signals ​ 
- 
-The [[http://​wiki.2printbeta.de/​doku.php/​dice-boards|DICEs]] are used to fulfil specific tasks: ​ 
-  * Driving stepper motors 
-  * Switching actuators 
-  * Measure temperatures 
-  * Set and get digital signals 
-As there are more DICEs in development,​ the possibilities will constantly grow. 
- 
-===== Basic modules ====== 
- 
-The basic set of BAM&​DICE consists of the following modules: \\ 
- 
-{{:​bam_dice-modules-v1.0.jpg?​500|BAM&​DICE - Modules V1.0}} \\ 
- 
-Each DICE-Slot can be configured with three jumpers to define substeppings \\ 
-or addresses for the DICEs. Most of the DICEs can be configured to work with 3.3V and 5V logic. \\ 
-Please look [[http://​wiki.2printbeta.de/​doku.php/​dice-boards|here]],​ to get the plans. \\ 
-Also, a big number of peripheral devices and sensors can be attached due to the full compatibility to RAMPS. \\ 
- 
  

bam_dice.txt ยท Last modified: 2018/07/20 16:08 (external edit)